» » How to Descale a Kettle

0 Wednesday, November 5, 2014
1
If you use a kettle with an electric wire to heat up your boiling water, you may know that after a while it starts coating with limescale, if you let it go the kettle will perform worse with time

2
Here is how it looks covered with limescale, you can see a layer of crystallized material around the wire
Here is how it looks covered with limescale, you can see a layer of crystallized material around the wire

Recommended For You
3
Mix 1part of white vinegar with 1part of water until you have enough to cover the wire entirely. You can use the same water you normally put here, the same one that generated that same limescale.
Mix 1part of white vinegar with 1part of water until you have enough to cover the wire entirely. You can use the same water you normally put here, the same one that generated that same limescale.

4
Set aside for 30min and the magic is done!
Set aside for 30min and the magic is done!

5
Rinse well with water at least 5 times to remove all the vinegar and it's ready to be used again! Back to the original shininess!
Rinse well with water at least 5 times to remove all the vinegar and it's ready to be used again! Back to the original shininess!

Được đăng bởi

Post a Comment

0 nhận xét

Dear readers, after reading the Content please ask for advice and to provide constructive feedback Please Write Relevant Comment with Polite Language.Your comments inspired me to continue blogging. Your opinion much more valuable to me. Thank you.

/ / How to Descale a Kettle

How to Descale a Kettle

1
If you use a kettle with an electric wire to heat up your boiling water, you may know that after a while it starts coating with limescale, if you let it go the kettle will perform worse with time

2
Here is how it looks covered with limescale, you can see a layer of crystallized material around the wire
Here is how it looks covered with limescale, you can see a layer of crystallized material around the wire

Recommended For You
3
Mix 1part of white vinegar with 1part of water until you have enough to cover the wire entirely. You can use the same water you normally put here, the same one that generated that same limescale.
Mix 1part of white vinegar with 1part of water until you have enough to cover the wire entirely. You can use the same water you normally put here, the same one that generated that same limescale.

4
Set aside for 30min and the magic is done!
Set aside for 30min and the magic is done!

5
Rinse well with water at least 5 times to remove all the vinegar and it's ready to be used again! Back to the original shininess!
Rinse well with water at least 5 times to remove all the vinegar and it's ready to be used again! Back to the original shininess!

Share on Google Plus

About AdsPublisher

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
    Blogger Comment
    Facebook Comment